• Por favor, copia e pega a mensaxe de erro que ves na túa pantalla, se houbera algún.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Por favor, explica o que querías facer, o que fixeche e o que pasou

• Cal é o teu navegador?

• Por favor, copia/pega o texto amosado en inglés no canto do teu idioma. Se tes un pantallazo deste erro (boa práctica), podes usar Imgur.com para subilo e copiar/pegar a ligazón aquí.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• É este o texto dispoñible no sistema de tradución? Se é así, foi traducido fai máis de 24 horas?

• Cal é o teu navegador?

• Por favor explica a túa suxestión de maneira precisa e concisa para que sexa o máis sinxelo posible entender o que queres dicir.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Cal é o teu navegador?

• Qué había na pantalla cando se quedou bloqueado? (mensaxe de erro?, pantalla en blanco?, unha parte da interface do xogo?)

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Cal é o teu navegador?

• Qué parte das regras non se cumpriron na adaptación da BGA?

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• é visible a violación das regras na repetición? Se o é, en que número de movemento?

• Cal é o teu navegador?

• Qué acción de xogo querías realizar?

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Qué é o que tratache de facer para activar esta acción do xogo?

• Qué sucedeu cando o fixeche (a mensaxe de erro, mensaxe na barra de estado do xogo, ...)?

• Cal é o teu navegador?

• En que paso do xogo ocorreu o problema (cal foi a instrucción actual do xogo)?

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Qué sucedeu cando tratache de facer unha acción de xogo (mensaxe de erro, mensaxe na barra de estado do xogo, ...)?

• Cal é o teu navegador?

• Por favor, describe o problema de visualización. Se tes un pantallazo deste erro (boa práctica), podes usar Imgur.com para subilo e copiar/pegar a ligazón aquí.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Cal é o teu navegador?

• Por favor, copia/pega o texto amosado en inglés no canto do teu idioma. Se tes un pantallazo deste erro (boa práctica), podes usar Imgur.com para subilo e copiar/pegar a ligazón aquí.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• É este o texto dispoñible no sistema de tradución? Se é así, foi traducido fai máis de 24 horas?

• Cal é o teu navegador?

• Por favor explica a túa suxestión de maneira precisa e concisa para que sexa o máis sinxelo posible entender o que queres dicir.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Cal é o teu navegador?